
What Is Time-to-Hire? Formula, Benchmarks, How to Cut It
Time-to-hire is the number of days between a candidate applying for a role (or entering your pipeline) and that same candidate accepting your offer. To calculate it, subtract the application date from the acceptance date for each hire, then average the results. Most published benchmarks fall between 20 and 44 days, and the right target depends on the role.
The metric tells you two things at once: how efficient your hiring process is, and how long a good candidate waits before a faster competitor makes an offer. It is often confused with time-to-fill, which starts earlier and measures something different.
This article is written for recruiters and agency owners in India. You will see why the metric matters, the formula with a worked example and a spreadsheet version, how it differs from time-to-fill, what a good number looks like, and how to bring yours down. Olibr builds an ATS for Indian recruiting teams, so the examples use the stages, notice periods and sourcing channels you deal with every day.
Why time-to-hire matters to your recruiting team
Time-to-hire matters because every extra day gives a competing offer the chance to land first, and every stalled stage costs you placements and client trust. It is the quickest way to see whether your process helps or hurts you.
Slow hiring loses good candidates
Strong candidates rarely sit in one process. A Pune developer serving a 60-day notice period is often interviewing at three companies, and the first clear offer usually wins. A 2023 Robert Half survey reported that 83% of hiring managers missed out on a good hire in the past year, and 29% of them blamed a long time to hire.
Silence is the other cost. A candidate who hears nothing for five days after an interview starts to doubt your company, and that doubt shows up later as an offer drop-out.
Every day without a decision is a day a competing offer can win your candidate.
A high number points to a stuck stage
Time-to-hire works as a diagnostic. A long average rarely means everyone is slow. It usually means one stage is stuck. The common causes are:
- Jobs posted in too few channels, so the pipeline starts thin.
- Recruiters juggling too many open roles to reply quickly.
- Hiring managers or clients who cannot find time for interviews or feedback.
- Too many interview rounds for the seniority of the role.
In agency work, the usual culprit is client feedback. Once you measure each stage, you can show a client that the delay sits on their side, with dates to prove it.
How to calculate time-to-hire
To calculate time-to-hire, subtract the date a candidate applied from the date they accepted your offer, then average that figure across all the hires you want to measure. The maths is simple. The discipline is in choosing your start and stop points and keeping them fixed.
The formula
The time to hire formula is:
Time-to-hire = total days from application to offer acceptance, across all hires ÷ number of hires
Three rules keep the number honest. Start the clock when the candidate enters your pipeline. For inbound applicants that is the application date. For candidates you source from Naukri Resdex or LinkedIn, use the day they were added to your pipeline or replied. Stop the clock at offer acceptance, not the joining date. The notice period belongs to a separate metric. Finally, count only the people you hired, not everyone who applied.
Pick calendar days or working days and stick with it. Calendar days are easier to explain to clients.
A worked example
Say your team closed five roles this quarter. The days from pipeline entry to accepted offer were:
| Role and city | Days to hire |
|---|---|
| Accounts executive, Mumbai | 8 |
| Data analyst, Bangalore | 12 |
| Sales manager, Delhi NCR | 15 |
| DevOps engineer, Hyderabad | 22 |
| Java developer, Pune | 28 |
The total is 85 days across 5 hires, so the average time-to-hire is 17 days. The median is 15 days, which is the middle value. When one slow technical hire pulls the average up, the median is the fairer figure, so track both.
A calculator in your spreadsheet
If you still work in Excel or Google Sheets, a time to hire calculator takes four columns: candidate, date entered pipeline (B), date offer accepted (C), and days. Paste these formulas:

D2: =C2-B2
Average: =AVERAGE(D2:D20)
Median: =MEDIAN(D2:D20)
Working days: =NETWORKDAYS(B2,C2)-1
Format column D as a plain number, or the sheet will show a date. NETWORKDAYS counts both end dates and skips weekends, hence the minus 1. Add a holiday range as a third argument to skip Indian public holidays.
Time-to-hire vs time-to-fill
Time-to-hire runs from the candidate's application to offer acceptance. Time-to-fill runs from the approval of the job requisition to offer acceptance. Time-to-fill contains time-to-hire plus every day before the right candidate showed up.

The difference at a glance
| Time-to-hire | Time-to-fill | |
|---|---|---|
| Clock starts | Candidate applies or enters pipeline | Job requisition is approved |
| Clock stops | Offer accepted | Offer accepted |
| Measures | Speed of your selection process | The whole hiring timeline |
| Includes approvals, JD writing, posting | No | Yes |
Here is one role. The requisition is approved on 1 October, the shortlisted candidate enters your pipeline on 14 October, and she accepts on 29 October. Time-to-fill is 28 days and time-to-hire is 15 days. The 13 days in between were spent on approvals, the JD and sourcing.
A few vendors start time-to-hire at the day the job ad goes live. Treat figures from such sources as closer to time-to-fill.
Time-to-fill measures the whole timeline, and time-to-hire measures only how fast you move a candidate you already have.
Which one to track
Track both if you hire in-house. Time-to-fill shows what a vacancy costs you, and time-to-hire shows which stages to fix. Agencies usually cannot control a client's internal approvals, so time-to-hire is the metric you own. If you want a time-to-fill figure, start the clock when the client hands you the JD.
What is a good time-to-hire?
A good time-to-hire for a typical role is roughly 20 to 30 days. Specialist and technical roles take longer, and a pipeline that is already full can go lower. No single number fits every role, city or seniority.
Benchmarks side by side
Published figures mix time-to-hire and time-to-fill, so check what each one measures:
| Source or segment | Reported figure | What it measures |
|---|---|---|
| SHRM | 24 days | Screening to offer acceptance |
| SHRM | 36 days | Time-to-fill |
| Recruiting vendor data | 20 to 30 days | Time-to-hire |
| 2023 industry research | 44 days | Reported average |
| Tech and media | 20 days | Shortest by industry |
| Energy and defense (2022) | 67 days | Specialized roles |
| Engineering roles | 60+ days | Often exceed this |
These figures come from global surveys, not Indian-only data. Use them as a reference and build your own baseline. For context, Olibr's average time-to-hire across its clients is 15 days.
Faster is not always better
Chasing the lowest number backfires. If you interview the first candidate who applies, you have no comparison. Waiting for a slate of five to eight suitable candidates is a sound habit unless the hiring manager has filled the same role several times recently. So a time-to-hire under two weeks is a warning sign unless the slate was already full.
Compare roles of the same type, such as IT with IT and sales with sales. Then beat your own median quarter by quarter, and read the figure next to quality metrics such as early attrition.
How to cut time-to-hire without lowering quality
Cut time-to-hire by finding the slowest stage, putting a deadline on every stage, and removing manual work from sourcing and screening. Do not rush interviews or skip the shortlist.
Put a deadline on every stage
Measure the days candidates spend in each stage, not only the total. Then set a limit per stage. These are example targets to adapt:

- Screening call within one working day of a CV landing.
- Interview scheduled within two days of a positive screen.
- Feedback within 24 hours of each interview.
- Offer within one day of the final round.
Olibr's ATS has pipeline stages, a kanban board, notes and team roles, so you can see where candidates pile up. The ATS is free, and access is kept by contributing 50 candidate profiles per active user every 30 days. Name one owner for each slow stage, whether that is you, a colleague or a client.
Fix the one stage where candidates wait longest, and the average falls without rushing anything else.
Shorten sourcing and screening
Most lost days sit at the start. Get CVs into one searchable place. Olibr's Desktop Importer reads a folder of CVs, a Chrome extension pulls profiles from Naukri Resdex and LinkedIn, and bulk CV parsing turns PDFs, Word files and spreadsheets into structured data. The first 50 CVs are parsed free.
For screening, AI matching ranks candidates against the JD, and AI video interviews score transcripts for your team. These are paid per use: the first 10 interviews are free, then each costs INR 99 from your wallet. For repeat roles, keep a ready pool. Search Talent opens once your company contributes its first profiles.
Finally, write sharper JDs. State the CTC range in LPA, the location and the notice period you can accept, so unsuitable applicants drop out early.
Putting time-to-hire to work
Time-to-hire is the days from application to accepted offer, averaged across your hires. It is not time-to-fill, which starts at the approved requisition. Calculate both with fixed start and stop points, read the median beside the average, and compare roles of the same type. A good range is roughly 20 to 30 days, but speed means little if quality drops.
Start by recording the date each candidate enters your pipeline and the date they accept. Within one quarter you will see which stage costs you the most days. If you want those dates captured automatically, set up your pipeline in Olibr's free ATS and move your next hire through it.
For hiring teams
Search 180,000+ candidate profiles — free.
Olibr is a community-funded recruiting platform: full ATS, AI interviews, and a shared resume database. No per-seat fees.